Category: Main

The Top 3 Best Lights For Boosted Boards. Night Riding.

Getting a set of headlights and taillights for your Boosted board is one of the best things you can buy for it.

Lights can save your life when you’re riding at night.

Being seen can mean the difference between getting home safely at night or going to the hospital.

Remember that your safety is your own and no one else’s…

Don’t think it’s a given. Take the time to buy lights if you ride at night.

It can be hard and tricky to find the best lights.

Avoid going on Amazon… There are a lot of cheap lights that have bad reviews.

But don’t worry, we’ve found the three best lights for your Boosted Board.

Let’s get started!

1.Shred Lights SL-200 Combo Pack

The SL-200 is without a doubt the best light you can buy for your boosted board.

Depending on the mounts you get, the retail price starts at $99.

And yes, they work with all models of Boosted boards:

  • Boosted Stealth
  • Boosted Plus
  • Boosted Mini X
  • Boosted Mini S

For many reasons, the SL-200 are the best lights for your Boosted board.

First, how long it lasts.

Try to guess how long they will last…

Five hours, ten hours, or twenty?

Try closer to 150 hours… That’s right, these bad boys can run for more than 6 days straight at the most.

The best part is that they can be fully charged in only 2 hours.

You can go for long rides on your board knowing that you’ll be visible the whole time… No need to worry about charging while on the go!

There are also 6 different light modes on the SL-200.

  • Low Beam
  • Medium Beam
  • High Beam
  • Low Flashing
  • Medium Flashing
  • High Flashing

You can choose from 3 different ways to flash or 3 different ways to keep the light on.

Use the flashing modes if you are really worried about being seen. With all those flashing lights, drivers will have no choice but to notice you.

Use a steady beam if you just want to light up the area right in front of you.

Overall, for $99, you get a pretty good deal.

There are no other lights like this… (do not shop on Amazon).

What’s in the box:

  • (2) White SL-200 Lights (Headlights)
  • (2) Red SL-200 Lights (Taillights)
  • (2) Dual Micro USB Charging Cables
  • (2) Pairs of mounts of your choice
  • (3) ShredLights Stickers
  • 30 Day Money Back Guarantee
  • 90 Day Warranty

The Shred Lights are also very simple to set up.

The SL-200 lights are attached to mounts, which you put on the trunks of your cars.

First, unscrew the nut that’s holding your trunk in place and slide the mount on. You can then put the nut back on and slide the lights onto the mount. Simple as that.

Here’s a video that will show you how to do it.

As was already said, each board has a different amount of room for the lights under it.

So, you have to buy the right kind of mounts to make sure the lights will fit.

But don’t worry, we’ll take care of you…

Both the Boosted Plus and the Stealth have Standard Mounts in the front and Angled Mounts in the back. (Standard/Angled)

Standard Mounts will fit on the front of the Boosted Mini S and X, and Extended Mounts will fit on the back. (Standard/Extended)

Just make sure that when you check out, you choose the right option!

Overall, these are by far the best lights on the market and come highly recommended to keep you safe.

Joshua I Parker Photography

2.Illume V2 E-Board Headlight And Taillight

This is a fascinating situation.

These lights are not made by a company, but by a single person.

You can find these lights at GenexDesigns on Etsy…

With over 51 reviews giving these things 4.5 out of 5 stars, you can trust them.

Starting at $51.99, the combo set includes both the front headlight and the back taillight.

What’s interesting about these lights is that, unlike most electric skateboard lights, they’re not attached to the bottom of the board. Instead, they’re attached to the top deck of the board.

In the same way, they go on mounts that go on your trunks, but this time they go on the top of your deck.

I’m not sure how this will change the way you ride now. It’s possible that the lights will make it hard for you to keep your feet on the ground.

But from what people have said, it seems like everything is fine.

Sam Wiewel is the owner of Genex Designs. He is so sure of the quality of his mounts that he guarantees them for life.

As for the lights themselves, they do an excellent job.

The headlight can be turned on in four different ways. Three steady beams and one that strobes. Here is how long the battery lasts:

  • 5 hours on max
  • 4 hours on medium
  • 8 hours on low

The best part is that the light can shine up to 150 feet away and be seen from more than a mile away…

The Blitzu 168T taillight is made by the company Blitzu.

The light was originally made for bicycles, but it works great as a light for your Boosted board.

The tail light has 6 different modes of brightness and flashing, as well as different battery life:

  • 5 hours on max
  • 6 hours on low

It takes less than an hour to fully charge. It shines light 15 feet behind you and lets people see you from more than 300 feet away.

With all of the features it has and the fact that it only costs $52, I’d say this light is a steal.

The only thing I don’t like is that shipping can take up to two weeks, depending on where you live, unless you pay extra for faster shipping.

3.Koowheel LED Lights

Koowheel LED Lights are last but not least.

You can get one of these from Amazon for $22.99.

A lot of the electric skateboard lights on Amazon are pretty low quality and have pretty bad reviews.

Overall, 3.5 out of 5 stars are given to the Koowheel lights.

Even though these lights are ranked third, there are a lot of bad reviews about broken brackets, lights that won’t turn on, and other problems.

This is the best choice if you’re just looking for lights based on price and saving money. But it might or might not be good.

There are 4 lights in the package:

  • 2 front headlight
  • 2 rear taillights

They have two ways to light up: a steady high beam and a strobe. It takes 1 hour to fully charge, and then it will work for 4 hours straight.

They can also stand up to water and work well in bad weather.

Few Choices Are Available

If you read my last article about electric skateboard lights, you’ll know that there aren’t many ways to light up your Boosted board.

We should have more choices.

Shred Lights is the clear winner, but the market needs more competition to get things moving.

If you don’t want to spend money on lights that go on your electric skateboard, you can buy other things, such as:

  • Neon Vests
  • Reflective Patches and Bracelets
  • Helmet Lights

The best way to make yourself more visible is probably to use lights. Here are some other ways.

Remember that your safety comes first… don’t just assume people can see you.

 

Headset VS Headphone VS Earphone

When trying to choose the right audio equipment, do you ever feel overwhelmed?

Headsets, headphones, and earphones are all types of audio equipment that let you listen to music and other sounds. Do you know what a headset, headphones, and earphones are?

If you can’t decide between headsets, headphones, and earphones, don’t worry. This post will help you understand the differences between headsets, headphones, and earphones.

Earphone vs. Headset vs. Headphone Which One Is Best?

What is Headset?

A headset is a set of headphones and a microphone that you put on your head. Headsets can be wired or wireless, and most of them have a microphone built right in.

People use headsets for gaming and Skype calls because they let you hear and talk without having to hold anything.

Does the headset have a good sound?

Some headsets can have good sound quality, but it depends on the headset. For example, computer gaming headsets won’t be able to match the sound quality of high-end headphones. But the sound quality of most headsets will be better than that of earphones.

What does “active noise canceling” mean on a headphone?

Some headsets have a feature that gets rid of noise by itself. This feature makes it easier to hear less of the noise around you, which makes it great for use in noisy places.

What does “passive noise canceling” mean on a headphone?

Passive noise cancellation is the standard way that a headset gets rid of noise. So, headsets will be able to cut down on some noise.

Can you listen to music on a gaming headset?

Most gaming headsets are not made for listening to music, but some do have good sound quality. Check out our blog post about the best headphones for music if you want to find headphones that are made for music.

Are headsets for video games good for movies?

Most gaming headsets can also be used to listen to music and watch movies. But if you want surround sound, you might want to look into a surround sound headset.

Tai nghe headphone vs earbuds

How do headphone work?

A headphone is a single piece of equipment that goes on or over your ears. Headphones can be either wired or wireless, and they can have open or closed backs.

Open-backed headphones let sound escape from the ear cups, so the sound you hear is more natural. Most outside noise is blocked by closed-back headphones, which are great for listening in noisy places.

What are headphones that go over your ears?

On-ear headphones, also called “over-ear” headphones, sit on your ears instead of around them. They make the sound more open and let more outside noise in.

What are headphones with a closed back?

Closed-back headphones fit snugly around your ears and block out all outside noise. Closed-back headphones block out the most noise and are good to use in loud places.

What are headphones with an open back?

Open-back headphones let sound escape from the ear cups and give a more natural sound experience. They do not block out as much noise as closed-back headphones, though.

When listening to live music, wireless headphones sound best.

When listening to music, wireless headphones can give you great sound quality, but this will depend on the type of headphones you buy.

Most headphones will sound a little bit worse than wired headphones. If you buy headphones with open backs, the sound won’t be as good as if you bought headphones with closed backs.

Which is better for gaming: headphones or headsets?

There is no one right answer because it depends on what you like. Some people like headsets because they have a built-in microphone and controls for the volume, while others like headphones because the sound quality is better.

What is an earphone?

A small, portable audio device that fits in your ear canal is called an earphone. Earphones can be wired or wireless, and most of them have a microphone built right in. People often use earphones to listen to music on the go because they are small and easy to carry.

Is there a microphone on the earphone?

Most earphones have a microphone that is attached to the cable. This means that when you talk, the microphone will be close to your mouth, so the sound will be clear.

Are there different sizes of earphones?

Earphones don’t come in different sizes, but they do come in different shapes. Ear tips for wireless headphones come in different sizes, giving you more options.

Headphones and earphones: Are they the same thing?

You can listen to audio with both headphones and earphones. Earphones sit in the outer part of the ear, while headphones go over the head.

Earbuds vs. earphones?

Earbuds and earphones are not the same thing. Earphones fit inside your ear canal and sound better than earbuds. Earbuds sit just outside your ear, and they don’t make as good of sound as earphones.

What are earbuds that are truly wireless?

True wireless earbuds are a type of earphone in which the left and right earpieces are not connected by a wire.

Instead, they use Bluetooth to connect to you and each other. This gives you the freedom to move around without worrying about getting tangled in cords.

So, what is the best audio device for you?

It depends on what you want and what you need. A headset is the best choice if you need something that can both listen and let you talk. If you want to listen to music on the go, a headphone or earphone is a good choice.

What does noise isolation by passive means?

Passive noise isolation is the standard way that headphones block out sound. This means that headsets can cut down on some noise, but they can’t completely block out all outside noise.

What is “noise cancellation that works?”

Some headsets have a feature that gets rid of noise by itself. This feature makes it easier to hear less of the noise around you, which makes it great for use in noisy places.

The ear canal is what?

The hollow passageway that leads to your eardrum is called the ear canal. To listen to audio, you can put an earphone or a headphone in your ear canal.

Are ear canals different sizes?

The shapes of people’s ear canals are all different, but they are all about the same size. This means that most earphones and headphones should fit comfortably in your ear canal.

What is the ear’s outside?

The outer ear is the part of the ear that is on the outside. This includes the tragus, the anti-tragus, and your earlobes. They don’t change how well audio devices sound in any way.

What are earbuds or headphones?

Ear-worn speakers are a type of headphones with two speakers that send sound into your ear canals. These headphones don’t block out noise, but they do make a sound that is fuller and richer than most headphones.

Do over-the-ear headphones sound better than on-the-ear ones?

On-ear headphones and over-ear headphones have the same sound. The difference between on-ear and over-ear headphones has nothing to do with how well they sound.

Over-ear headphones are bigger and go all the way around your ear. On-ear headphones are smaller and sit on top of your ears.

Headphones that cancel out noise on their own are cheap?

No, passive noise cancellation is something that comes with every pair of headphones. Only headphones that don’t have active noise cancellation are cheap.

Conclusion

Now that you know what headsets, headphones, and earphones are, you can choose the right one for you. A headset is best if you need to talk and listen at the same time. Earphones or headphones are the way to go if you want something small and easy to carry.

FAQs on Headset, Headphone, and Earphone

Is it bad for your ears to wear headphones all day long?

No, wearing headphones won’t hurt your ears. But if you listen to loud music for a long time, you could hurt your hearing.

How long should you wear headphones each day?

The answer to this question depends on how loudly you play your music and how long you wear your headphones. For your own safety, you should always take breaks from listening to audio.

Do headphones hurt the brain in any way?

There is no proof that headphones hurt the brain. But listening to music or other sounds at a loud volume can hurt your hearing.

Which kind of headphones are best for kids?

To protect their hearing, kids should use headphones with a volume limiter. There is no way to turn up the volume on these headphones.

 

How many pins-does-my ram have? Let’s Get Things Straightened Out!

You may not be aware of the fact that your RAM is made up of pins. Pins are found on every type of RAM, regardless of the model. These are the components of a RAM that are necessary for it to function correctly. However, many of us are unaware of the number of pins in a computer’s RAM memory.

My RAM has how many pins? DDR4 SDRAM, with its 288 pins, is the most widely utilized form of DRAM. Another thing to keep in mind is that the pin count for SO-DIMMS is 260, while DDR2 RAM and DDR3 RAM each have 204 and 288 pins, respectively. There are a variety of RAMs available on the market. RAMs come in a variety of configurations, each with a unique number of pins.

There’s always more to let go of and more power to wield. Each ram’s pin number, as well as the pin’s significance, will be presented to you. As a result, now is the time to get started.

Do I have enough RAM to run all of my programs?

RAM comes in a wide range of configurations. It’s important to be aware that no two models have exactly the same number of pins. If we look into it, we’ll discover that different RAM models have varied pin counts. We’ll now go over the most prevalent RAMs and how many pins each one has to offer.

Ram Model Pin Number 
SO-DIMMs 260 pins
DDR4 SDRAM 288 pins
DDR2 RAM 204 pins
DDR3 RAM 204 pins
DDR4 RAM 288 pins
SIMM 30 pins
DIMM 168 pins
SDRAM 288 pins

 

RAM versions with varied pin counts are available. It is mostly dependent on the number of pins that RAM has. Consider the number of pins the RAM has while you’re shopping for a computer or laptop.

It is impossible to use the same RAM across several devices. Restriction is one among them. If you want to use 240 pin RAM, you can only use it on a computer. 204 pin RAM, on the other hand, is ideal for laptops. This means that when purchasing RAM, especially if you are building your own computer, you must pay attention to the pin number.

Is the Number of RAM Pins a Factor in Performance?

To some extent, the answer is yes, but not always. If you have DDR4 RAM installed, the answer to this inquiry is “no”. When it comes to the specifications and quality of DDR4 DIMMS, they all meet the same criteria.

Alternatively, if you don’t use DDR4, then the answer is “no.” Other RAM’s quality is determined by the number of pins it has. The more pins you have, the more options you have.

There is also the fact that not all RAM types are compatible with all devices. Because a 204 pin RAM is only ideal for laptops, you cannot use a 204 pin RAM in a computer.

Also, laptops cannot use 240-pin RAM because it is designed for desktop computers only. As a result, the RAM’s pin count is critical to performance. Although specs and performance are also affected, this is a significant issue.

To locate the RAM pin on your laptop, follow these steps.

It’s critical to know what your RAM’s PIN number is. Without knowing the pin number, you can’t do a lot of things. Furthermore, without the pin number, you will be unable to do some future upgrades. As a result, we’ll walk you through the steps necessary to discover your laptop’s RAM pin number.

It’s a rather straightforward process. There are only a few steps you need to take to discover this. Taking a closer look at the process:

  • Step 1 – To begin, you’ll need to go outside of your laptop and into natural light. System information will then be displayed. 
  • Step 2 – There is a section devoted to RAM in the system information. Your RAM’s storage, PIN, and other data are all found in this section..
  • Step 3 – The PIN will tell you what kind of RAM your laptop has. This will allow you to simply increase the device’s specifications without having to remove any of its components.

How Much Difference Is There Between 204 Pin and 240 Pin RAM?

All RAM isn’t created equal, and 204 and 240 pin RAM are two different beasts in that department. Which one, then, should you go with? What is the answer to this question?

When utilizing a laptop, you should utilize 204-pin RAM instead of 168-pin. Because 204-pin RAM is required for the operation of a laptop. 240-pin RAM is required for a computer, hence a 204-pin RAM will not work.

Some specifications of the 240 pin RAM make it superior to the 204 pin RAM, while the difference depends on the device. 240 pin RAM is not backwards compatible with 204 pin RAM in the first case.

The speed is also a big factor here. The new 240 pin RAM is a huge improvement because of its remarkable performance. As a result, 240-pin RAM is clearly superior to 204-pin RAM. Ultimately, though, the decision comes down to what you want.

My RAM PIN number is not showing up on my computer screen.

To accomplish this, you’ll need to go through the same set of steps as before. There are a few things you can do:

  1. Open your computer or laptop first.
  2. The command prompt is the next step.
  3. Run as administrator by clicking the top result and selecting the option.
  4. You’ll notice a section labeled RAM after that. Your RAM’s specifications and information can be found in that area.

Wrapping up:

Your device’s most critical component is its RAM. The RAM is the backbone of the entire storage system.

By this point, you should be familiar with the question, “How Many Pins Does My Ram Have?” If you want to upgrade your RAM or know exactly what your gadget is capable of, you’ll need to know how many pins it has.

Despite the fact that we’ve provided pin counts for a number of popular rams, be sure to double-check your own RAM’s model number before adopting our suggestions. You can also check if your ram is missing from the list by following our manual procedure.

We’ve also discussed some critical difficulties that are dependent on the amount of RAM. As a beginner or an experienced user, we hope you find this information useful. With this information, you’ll be able to solve a lot of problems.

 

How to change lawn mower tire

It is the ultimate dream of any gardener to have a perfectly mowed lawn that not only looks healthy and beautiful, but also provides the ultimate in convenience. Obtaining a level lawn, on the other hand, does not come on a silver platter. You should make certain that your mower’s blade is well sharpened and that you replace the mower’s blade as needed. Additionally, to ensure an even mow, you must ensure that the threads on your tires are in good condition. In this article, you will learn how to change a lawn mower tire quickly and easily with no hassle.
Change the tire on your mower on occasion, whether the thread on the tire has worn out or the tire has simply popped off due to wear and tear. Make an effort to complete this task before the start of the mowing season, just as you would with any other mower maintenance task.
Fortunately, changing a lawn mower tire is a simple process that only requires a few minutes of your time. It only takes a few tools and replacement parts that have been approved by the manufacturer to complete the job. This post will not only answer all of your questions about how to change a lawn mower tire, but it will also provide you with unrivaled insights into the topic of lawn mower tires. Please continue reading.

Signs It’s Time to Change a Lawn Mower Tire

Worn down thread. When you’re mowing the lawn, be sure to check the thread frequently to make sure it’s in the proper condition.
Presence of dry rot problems. Tires should be checked for dry rot and cracks in the rubber on a regular basis. Tires become unreliable as a result of dry rot, and they may even blow out.
Significant wobbling of the lawn mower.However, even though mowers are designed to wobble slightly, if the wobble becomes significant, your lawn may take on the appearance of someone who has a bad haircut. That’s something you don’t want, do you? As a result, inspect the axle nut on a regular basis and make any necessary adjustments to ensure there is no tire deformation. In the event of uneven tires, they should be replaced.
Need to frequently fill the tire. This is a warning sign that there is a hole in the tire because you shouldn’t have to refill the tires on your lawnmower so frequently. Tire sealant can be used to patch holes in your mower’s tire if it needs to be refilled frequently.

How to Change a Lawn Mower Tire?

Requirements

New lawn mower tire
50/50 dish soap & water mixture
Pair of pliers
Valve stem tool
Tire pressure gauge
Paint brush
Floor jack
Jack stands
2 large slotted screwdrivers
Air compressor
This will also save money instead of hauling you machine to the mechanic.
An assortment of wrenches-these will depend on the size of the tire’s nuts
A little time.

Let’s do it together

Step 1: Disconnect the Spark Plug

With the lawn mower parked flat on an even surface, proceed as below.
Block the tires that don’t require any replacement to prevent the mower from rolling.
Position your floor jack under the frame.
Jack up the mower to raise the tires you intend to change off the ground.
Once it’s secure, place the jack stand underneath to support your mower.
Remove the jack

Step 2: Lift up the Mower

With the lawn mower parked flat on an even surface, proceed as below.
Block the tires that don’t require any replacement to prevent the mower from rolling.
Position your floor jack under the frame.
Jack up the mower to raise the tires you intend to change off the ground.
Once it’s secure, place the jack stand underneath to support your mower.
Remove the jack

Step 3: Before You Start To Removing the Tire

We’ll have to address some issues here before we can proceed, depending on the model of your mower. In fact, the front tires of some mowers may be mounted on spindles.
If this is the case, look for a rubber boot at the end of the spindle on your mower. Remove them first. A pair of pliers and a slow, gentle pull will accomplish this.

Step 4: Remove the Tire

This is where we can see the tire. With a tiny metallic C-clip, it’s usually held in place. Use a flathead screwdriver to remove it. Be on the lookout for this C-clip, as it has the potential to fly off. Before beginning any repairs, be sure to remove any keys holding the rim and axle of the tires together.
Remove the debris cap and washers from the tire. Make sure you get all of the washers. That’s a simple task for your hands to perform. Keys are accessible after removing the cap and washers. Remove the wheel’s pin with pliers, then slide the axle out of the way.

Step 5: Deflate the Tire

Unfasten and remove the valve stem cap.
Press a needle down to remove all the air therein.
Remove the valve core using the valve stem tool. Be keen in case there was some more air inside.

Step 6: Remove the Old Tire from the Rim

To let the tire slip off easily and prevent any possible damage to the rim, proceed as follows.
Using the paintbrush, apply the soap and water solution at the point where the tire and the rim meet. This is done to ensure optimal lubrication thus making its removal carefree.
Use two screwdrivers to pry beneath then work your way around it.
Apply additional water solution on the opposite side.
Using the screwdrivers, get the rim out of the center.
After the tire gets out, clean the rim with soap and water.

Step 7: Get the New Tire On

Start by lubricating the beads of the new tire with a tire lube or penetrating lubricant. As alluded hereinabove, dish soap and water solution serves this purpose. Apply an ample amount around the center of the new tire then:
Pry the tire open with the screwdrivers.
Slide the tire onto the rim at an angle of approximately 45 degrees.
Using the tire iron, force the rim into the tire and then continue to work the beads around it. You may apply more soap and water solution as needed.
If you have any inner-tube, insert if at this stage.
Secure the tire’s beads using the ratchet strap.

Step 8: Inflate the New Tire

Once everything is in place, proceed as follows.
Fix back the valve stem core.
Connect the air compressor’s hose.
Carefully pump up the tire to make it grip the rim firmly.
Continually check the tire pressure and pump it until it reaches the PSI range specified by the manufacturer.

Step 9: Reinstall the Wheel

Replace the washers and return the tire on the axle.
Fix back the C-clip and then the debris cap.

Step 10: Lower the Mower

Replace the jack under the frame and raise it while ensuring it supports the mower.
Slowly remove the jack stand and then set the mower back to its default position on the ground.
Finally, reconnect the spark plug and you’re done.
Even if you’ve got all the time in the world, you’ll want to avoid unnecessary lawn mower tire changes. As a result, you may need some advice on how to extend the life of your mower’s tires.

How to Make Your Lawn Mower Tires Last For Long

The beginning of mowing season is a good time to check on your lawn mower’s tires if you haven’t done so already.
Maintaining a regular schedule of inspections will help you identify any potential issues that could lead to costly repairs in the future. You’ll have a wonderful mowing season if you follow these tips to keep your lawn mower tires in top condition.
Proper Level of Inflation. The recommended pressure should always be found in the user’s manual. The ideal pressure range is from 18 to 22 pounds per square inch (PSI). Under- or over-inflation will result in premature tire wear and a reduction in your mower’s ability to grip when mowing up or down slopes.
Regular Inspection of the amount of Tire Threads.Wheel spin issues while steering can be caused by worn-down thread blocks. Check for dry rot and cracks in the remaining thread at all times. For a safe mowing, there should be about 3/32 inch of thread left. Threads that are worn out pose a risk.

Final Verdict

So, how did things turn out for you? We just hope that the process of changing your lawn mower tire went as smoothly as possible. Furthermore, we hope that your new tire is now comfortable in its surroundings and performs as expected. If there’s anything you think we should know, please let us know by leaving a comment in the section below. We’ll be delighted to receive your correspondence as well.

See more : Best lawn mowers for thick grass

 

How To Customize a Hoverboard?

Some people like to personalize their things to add their own touch and make something truly unique to them. A lot about who you are comes from the things you own.
Here, you’ll learn how to make your hoverboard unique. Add a little personality to your hoverboard with these cheap tips and tricks. You can add stickers, skins and do a lot of DIY custom ideas that will work for you.
If you are a parent, making things with your kids’ favorite toys is a great way to connect with them. It’s also a great thing for kids to do

Hoverboards that are made by you

All the hoverboards that are on the market may seem to look a little similar to each other. You can’t call a hoverboard unique if someone else bought the same model as you, even if you made it your own. If you want to make your hoverboard unique, you don’t have to spend a lot of money.
They may appeal to adults, but kids won’t be interested in them. Some companies, like Razor, make their hoverboards come in a lot of different colors so that kids can choose the one that looks the best to them.
It might not make a difference to teens or adults, but the color and design of their hoverboard make riding more fun because they can use their bright imaginations while riding.

1. Make Your Own Customization

Today, most people like to do their own things. It doesn’t matter if they’re painting their bedroom or making crafts out of wood, most people are now into DIY projects.
People who want to make their hoverboards unique can save money by making their own designs with cheap materials from the store or with things they already have at home.
Making a hoverboard your own lets you be creative. It’s also a fun thing to do with your child. DIY: You can use some of the following:
Stickers, colorful tape, and reflective tape are some of the things you’ll need to make your project look good.

It’s easy to find most of the materials you need for your DIY project at a dollar store near you. Your X-Acto Knife (2) will make it easy for you to cut the colorful and designer duct tape to fill in the parts of your hoverboard and make it look the way you want it to.

2. Make Your Own Hoverboard Skins

If you go online, you can look for custom hoverboard skins that will fit your model. You can also look for them. These skins are easy to put on, but make sure you get the right one for your board. Imagine that you buy a case for your new smartphone. They all work the same way.
You can buy hoverboard skins from Amazon or any other website that sells them. To look for a custom skin for your self-balancing smart scooter, type in the model number in the search bar, and then click search.
It’s easy to make your own skin for your hoverboard. There are a lot of designs to choose from, like floral prints, space design, camouflage, and many more!

3. Putting Stickers on the things you buy

The more stickers you have, the more you can cover the whole thing with stickers. Most stickers and decals can be found on Amazon or at any other online store like that.
In this case, the customization part is simple. So just stick them in any way you want to make the board look more interesting. To make your hoverboard look more like a race car, you can put decals on the top.

4. Decorate your Hoverboard

For extra fun, you could even paint your own hoverboard. It’s better to paint your own hoverboard than use pre-made skins or stickers. It will take a lot more work, but it’s also a fun thing to do if you have some extra time.
When you want to paint your hoverboard, you’re going to need these things:
Spray cans
Tape for painting or masking off (optional)
Before you paint your hoverboard, make sure that you tape off the parts that you don’t want to paint. Most of the time, you’d want to put tape on the LEDs, rubber foot pads, connection ports, and buttons.
Take care to make sure that every surface is smooth for a high-quality finish You can use sandpaper to make the surface of your hoverboard even.
All that’s left is to spray on the first layer of paint and wait for it to dry. When the first layer is dry, you can go ahead and spray the second layer of paint. To do one color or mix them up and use different colors in different places, you can.

5: Do all of the above things.

It’s also possible to mix and match to make your hoverboard unique. You can paint the hoverboard and put stickers on it, or you can buy custom decals and do some DIY work to make your own stickers. This does not matter how you make your hoverboard unique. Make sure you are happy with the end result.

Conclusion

You can have some fun by customizing a hoverboard. This is a way to add a personal touch and make the hoverboard your own. When you paint or add custom skins to a hoverboard, not only will it look better, but it can also hide scratches and dings. All of the ways are cheap and easy, so don’t forget to have fun!

How to change longboard bearings

If you’ve been longboarding for a while, there’s a good chance you’ll need to buy new bearings because of the wear and tear they’ll get. There will be a decrease in how well the board works if they don’t. If you replace them soon, it will be a huge help in getting the most out of it. The stability and durability of the parts of your longboard have a big impact on how well you can ride it. If even one part of your longboard bearings is broken, you will see a big difference in how well they work.

Longboard decks and parts are usually made of durable materials, but they need to be changed out at least once a year for safety and to keep the ride smooth. Another thing that needs to be changed from time to time is the bearings on a longboard. These parts must be replaced when they are worn out. You need to know how to do this.

 

Why do you need to change your longboard bearings?

It’s just as important to get the best longboard bearings as it is to have the best longboard bearings. First, let’s talk about why it’s important to change the bearings on your longboard before we get into how to do it. The main reason to get a new longboard is because it slows you down and it’s dangerous to ride a broken longboard. To slow down, the bearings on the longboards need to be changed when they get worn down. You’ll notice that your board doesn’t go as far after you push it hard.

Sometimes, when you try to take your board and spin your wheel by hand, the wear on the bearings speeds up even more quickly. When you don’t change the bearings, your safety is also at risk. They could get stuck. The seized bearings could cause your wheel to fall off, which could loosen the axle nut.

 

How can you tell if your longboard bearings have gone bad?

There are three ways to tell if longboard bearings are bad.

  1. Slowly turning the wheel.

In the second step, look for any noise coming from the bearings.

  1. The way your wheel moves from side to side.
  2. Slowly turning the wheel.

It’s time for the first test. Spin the wheel slowly. Perform this test by taking your board and gently spinning the wheel on it with your hand. It should be able to spin freely without having to use too much force. As soon as you try to spin it, it stops. These are all signs that your bearings are worn out and need to be replaced.

  1. Bearings make a lot of noise.

It’s time for the second test. The bearings should be checked for noise. There is more force you need to use to spin the wheel longer. Whenever it does, pay attention when it moves for noise. The bearings in good quality are very quiet. There is a very good chance that your bearings need to be changed out if they make any noises or make strange sounds.

  1. Moving from side to side.

To do this test, you need to move your longboard wheel to the side and back again. Make sure that the axle nut on your longboard is tight before you do this test. Now, move it along with the axle, going from the axle nut to the hanger and back again. Try to do these moves as quickly as you can. There will be no noise if your bearings are solid. They will keep your car from moving from side to side and will not move at all. You should double-check to make sure the axle nut isn’t loose. If you can still move the wheel, you should get a new one.

How To do it ?

  1. Take your axle nuts and speed washers off

Make sure your board is on its back. You can remove the axle nuts and speed washers with a skate tool or a power drill. Put them to one side. If you don’t want them to get lost, put them where you can see them! Do not take your wheels and other parts off.

  1. Remove the inner bearings

Pull the wheels off so that the outer bearings clear the end of the axle. Then twist the wheels off, leaving the inner bearings and spacers on the axle, and remove the wheels. When you open a bottle of beer, you move in the same way.

  1. Turn the wheels around.

In the end, you’ll be left with a pair of wheels with the outer bearings still inside of them. Turn them around and put them back on the axles so that the wheels are facing inwards, then put them back on.

  1. Remove the outer bearings

When you open a bottle of beer in the same way you did in step 2, remove the outer bearings.

 

  1. Check everything is aligned

This means you should now have a speed washer on each side of the axle. You should now have a spacer, a bearing, and a spacer on each side. If some things have come off, put them back on so that everything looks like this picture.

  1. Put the outer bearings on the ground.

With your new wheels, with the graphic facing inwards, push the wheels onto the bearings at the end of the wheel’s wheel tube. The process might be a little slow, but because you’re pushing both wheels on at once, it’s going to be twice as fast as it would be on its own!

  1. Turn your wheels round

Outer Bearings are the only bearings in each wheel. You should now have two pairs of wheels with one in each wheel. Turn the wheels so that they’re facing outwards again, and line them up with the inner bearings and spacers on the inside of the wheel.

  1. Make sure the inner bearings are in place.

Squeeze the wheels into the bearings on the inside. If it’s a tight fit on the core, you’ll have to get your muscles out. By doing both wheels at once, you’re going to make this twice as quick. The axles also keep everything in line, so there’s no need to mess around with a bearing spacer in your wheels.

9. Tighten up the axle nuts so they don’t move again.

Speed washer: Put it back on the axle. Then, thread the nut on and tighten it with your skate tool or power drill. To make sure that you have tightened your wheels enough but that they still move, give them a quick spin and shake. Then, go skate!

 

How to fix your iPhone earphone jack: 7 Steps to quickly fix your iPhone headphone jack

There are things that you can do to fix and mend your iPhone headphone jack.

Apple, of course, makes its products so that you can’t use generic parts.

Sometimes the problem is with the headphone jack itself, and sometimes it’s with the phone that has the problem.

The jack can break or bend if it is used too much or if it is inserted with a lot of force.

The first thing to do is to go to Apple and ask them what the problem is.

Ask them to put in a new set of headphones and then see if these headphones work. Apple service agents have been known to overstate problems. Pick up a soft brush and clean the Jack.

  1. Clean out the headphone jack

It’s possible to get lint, dirt, and other things stuck in the headphone jack. A lot of things could be behind this.

Dust and lint can build up when you put your headphones in your pocket or between clothes.

If headphones aren’t used for a long time, they can also get dirty.

Most important, make sure you clean your headphones with a soft brush or piece of cloth. You can even blow on the headphones to get rid of any particles that might be there.

2.The second thing you should do is tell us what your warranty is.

Most Apple products come with some kind of warranty, which lets you get your product fixed while it’s still under warranty.

People at an Apple Store can help you with this.

Since Apple sometimes charges a lot, there are services that can sometimes fix your iPhone for less than Apple charges.

  1. Make sure you aren’t connected to any other things.

There is a chance that your iPhone could be playing through another device instead of through your headphones if you are connected to more than one device.

In this case, make sure that your iPhone isn’t connected to any other Bluetooth devices.

  1. You can change the jack by yourself.

I don’t think this is the best way to do it if you’re afraid of wires or don’t like to do things like this.

Working with wires can be dangerous, so I would be careful before I tried to do this.

This can be very dangerous because it exposes wires and burns them.

Please be careful here. If you can’t do this, get someone who is a pro to do it for you.

Cut the cable at the point where the wire and the jack meet, and then cut the cable.

Remove the wire by pulling it with pliers until it is small enough to remove.

The wires of the iPhone are very well-insulated, so you might need some soldering paste to help you connect them. Read on to find out where to get some and how to use it.

Take a small amount of heat to the wire to get rid of the insulation.

Afterwards, gently scrape the wire with a blade to get rid of the burned bits.

If you can’t solder because there is a lot of insulation, then you might need soldering paste to get it to work again.

There are a lot of different types of solutions and paste that can be used for soldering. Take a look at the following for one that might do a good job of it.

Soldering is a word that people who don’t know what it means should learn about. Wikipedia has the best answer:

An alloy of metal that can be heated together is called solder. Solder makes metal work pieces stick together for a long time to come.

The wires will need to be soldered together. Then, we will need to buy a new headphone jack. Most of the time, this can be found on Amazon

To figure out what kind of jack to use, ask someone who knows Apple. There are a lot of different things that can be bought. Some are shown here.

I like to use a four-pole 3.5mm.

The next thing to do is to put the solder paste on the wire. A detailed video on how to solder a headphone jack can be found at the following link 

  1. Make sure you get a good pair of headphones with a good jack.

There are a lot of different types of headphones that you can get if you want to. This will depend on how much money you want to spend and what kind of headphones you want.

In the past, the most common headphones for an iPhone were very simple and didn’t come with any extra features.

However, there are a lot of different types of headphones out there that can be used for more than just listening to music and have a lot of extra features.

Headphones today have been made with bass in mind, and the sound can be very good. It’s possible to turn off the outside world with some headphones, because they can block out noise.

At the end of the day, it’s up to you what you want to be.

  1. Take care of them and protect them before they happen.

You should make sure you protect your phone before you buy it.

When you break a screen and have to pay for the repair, there’s nothing worse.

There are times when things go wrong, such as when you drop your headphones or they fall out of your pocket and get broken.

I think one of the best things to do is to use Heat-shrink tubing. You can read more about heat shrink tubing on Wikipedia.

“Heat-shrink tubing, also called heat shrink or heat shrink, is a shrinkable plastic tube that is used to insulate wires, protecting them from abrasion and the environment. It is also used to insulate wires, connections, joints, and terminals in electrical work.”

It can also be used to repair the insulation on wires or to bundle them together, to protect wires or small parts from minor abrasion, and to make cable entry seals that keep the environment out of the wires and keep them safe.

Tubing made with heat shrink is usually made of polyolefin, which shrinks radially (but not longitudinally) when heated. It usually shrinks between one-half and one-sixth of its diameter, but not both ways.

Heat-shrink tubing comes in a lot of different varieties and chemical compositions, and the exact composition of each type depends on what it is going to be used for.

Each type of tubing has a very specific design and chemical additives that make it able to meet a wide range of needs in a wide range of environments.

Heat-shrink tubing is rated by its “expansion ratio,” which is a comparison of how quickly it grows and how quickly it shrinks back.

Follow this link to learn more about how heat shrink tubing is made and what it is made of. Make sure it is the headphones that are having a problem, not something else.

You were told this when you called the iPhone store. Advice from the people at Apple is to do this. Other places you can get help from Apple are their support pages.

The headphone port on your iPhone, iPad, or iPod touch should be free of dirt and other things.

It’s a good idea to look over your headphone cable, connector, remote, and earbuds for damage, like wear or broken parts.

The meshes in each of the earbuds should be clean. Clean and dry a small, soft-bristled brush. Gently brush all of the openings with it, making sure to get all of them.

Plug your headphones back in with a firm push. For iOS devices with a case, remove the case to make sure you can connect.

In this case, you should:

Using the buttons on your iOS device, you can change the volume. You can also use the Volume slider in Control Center to do this.

To see if you need to buy a new pair of headphones, try a different pair of headphones.

If the second pair works, contact the company that made the first pair and ask if you need a new one. If the second pair doesn’t work, go to Apple Support and ask for help.

Sometimes, only one of your earphones might work. How do you fix this?

Several simple steps can help you.

Plug your headphones into a source of sound.

While the music is playing, twist and rub the wire to find out where the wires have been cut.

To move the wire around, rub it and move it right next to the headphone jack.

As soon as you know which wire has broken, cut that part off.

You can try to solder the wires together.

Again, be careful when following these steps when it comes to wiring.

Conclusion.

The best thing to do is to call Apple and ask them for help.

Even more so if the problem is not a simple one, like restarting your device or checking to see if your device is not connected to other devices through Bluetooth.

How do you make a skateboard ramp?

Building a skate ramp may be enjoyable for skateboarders of all skill levels. This fascinating investment needs time, caution, and careful planning to make the most of your available space.

Part 1: Design

1. Maximize all space.
When the ramp isn’t in use, have a look at your available space. When designing a portable ramp, keep in mind the challenges of storing it. Alternatively, if your yard is too tiny to accommodate other activities, you may not want to build a ramp.
The first thing to think about is the location of the ramp. Take into account the terrain, any barriers, and any problems with the city or its neighbors.. Check with anybody who could be affected to see if there are any noise or measurement limits on the size of your ramp.
Consider what would happen if your ramp wasn’t in place. If so, where would you put it and how will you get it there? To save, how much money will you need in the first place? Make sure to think about how the weather can affect how you utilize it before you buy. If left outside, it will prevent you and your family from doing anything except skating there.
Many people install a skate ramp in their garage, carport, or backyard for their kids to utilize.
If properly raised, sealed, and tarped, ramps may be left out in the open. To extend the life of your ramp, keep it out of the elements.

2. Select the kind of ramp.

Decide how extensive your ramp should be after assessing your surroundings. There is no limit to what you can do, whether you are a beginner or an expert.
Avoid going overboard with the glasses. In the future, even if you are just focusing on one ability, you’ll want to expand your horizons. Keep it basic if this is your first woodworking project.
It is possible to build a micro ramp in any shape or size. For first-timers, a jump-only ramp is ideal. You can practice a lot with a simple ramp that has ten-foot transitions and a little stairs.

Create a blueprint for your design in step three.

The best way to get a handle on the project’s scope is to write it down. Additionally, you will be able to put your mind at ease about any measuring issues you may be facing.
Online designs for professional ramps.
Design software at a discount is available. Look for free blueprints online, talk to friends who are designers, or go to your local hardware store to get started.
Make your design unique, but don’t start working on it until you’re satisfied with it totally. Starting and stopping all the time wastes time and energy.
Customization necessitates a great deal of trial and error, but you must use caution to avoid acting erratically. It’s possible you’ll have to start again if you wander too far and cut off too much ground instead of just an inch or two. This is especially true for ramps with a curved surface. Choosing a layout that fulfills the most of your requirements and customizing a second ramp is a good option if you’re just starting out or on a tight budget.

2. Select the kind of ramp.

Decide how extensive your ramp should be after assessing your surroundings. There is no limit to what you can do, whether you are a beginner or an expert.
Avoid going overboard with the glasses. In the future, even if you are just focusing on one ability, you’ll want to expand your horizons. Keep it basic if this is your first woodworking project.
It is possible to build a micro ramp in any shape or size. For first-timers, a jump-only ramp is ideal. You can practice a lot with a simple ramp that has ten-foot transitions and a little stairs.

Create a blueprint for your design in step three.

The best way to get a handle on the project’s scope is to write it down. Additionally, you will be able to put your mind at ease about any measuring issues you may be facing.
Online designs for professional ramps.
Design software at a discount is available. Look for free blueprints online, talk to friends who are designers, or go to your local hardware store to get started.
Make your design unique, but don’t start working on it until you’re satisfied with it totally. Starting and stopping all the time wastes time and energy.
Customization necessitates a great deal of trial and error, but you must use caution to avoid acting erratically. It’s possible you’ll have to start again if you wander too far and cut off too much ground instead of just an inch or two. This is especially true for ramps with a curved surface. Choosing a layout that fulfills the most of your requirements and customizing a second ramp is a good option if you’re just starting out or on a tight budget.

Part 3: Buil Your Ramp

 

1. Remove the ramp’s sides.

To begin, cut two pieces of plywood for the side walls. Outer edging of the ramp will be brittle.
A jigsaw and a pencil are all that’s needed if you didn’t have your wood cut at the hardware store.

2. Framing the ramp in a stairwell

Start by fastening the four supports shown on the drawing. Fig. 1. The ramp’s stability is improved with each additional nail. Align the second side and attach it into the supports once you’ve secured all four supports.
A front anchor may be used to secure the ramp’s sides. When finished, the frame won’t be level if it isn’t now.

3. Install Ramp Supports

Using the 2″ side up, screw your 2×6 and 2×4 together eight inches apart. Assemble the 2×6 first, since the reduced length of the 2×4 will help maintain the slope level with the ground.

For added sturdiness, place the 2×6 boards four inches apart at the top of the ramp.
If the 2×6’s break, a support (two longer 2×4) may be placed below them.

Finish the job by gluing all the plywood together.

Assemble the 2″ x 6″ and 4″ x 6″. This gives your ramp a short-term but secure advantage. Before installing the plywood, secure the nails. Screw the bottom sheet in place after the top sheet.. To provide a smooth transition, the bottom layer should slightly overhang the slope. Avoid catching and uneven ramps by drilling screws from the top down.
To ensure a smooth transition between panels, begin at the top and screw the panels together.

5. Build the surface of your ramp.

Two skatelite or masonite sheets should be placed on top of the plywood. ‘ The top of the ramp has been finished and revealed. Screw them into place every six to eight inches once they’ve been positioned precisely. Always begin at the top and work your way down the slopes.
The masonite or skatelite seam should not be placed directly on top of the plywood planks.

6.Attach the steel plate to the bottom of the ramp.

To begin drilling steel, make a pilot hole for the screw that will be used. Screw it in after that. Assists in ensuring that screws are level with the metal.

How do you ice skate ?

Anyone of any age may learn to ice skate, even a young toddler. A great aerobic workout and the chance to improve your balance and coordination are just some of the benefits of using a trampoline. Strengthening leg muscles, improving joint flexibility and increasing endurance are all benefits of regular exercise.

In addition to the health benefits, ice skating is an enjoyable activity. To join, all that is necessary is access to an ice rink and the willingness to try something new. You should wear clothing that is both light and warm, and that allows for maximum mobility. When it comes to protecting yourself in the event of an accident, a hockey or snowboarding helmet can be a good option for you (and confidence).

 

Renting skates at a public rink is a reasonable alternative to purchasing your own pair while learning to skate. On the other side, having your own skates means that you can improve as a skater since you have a better fit and a performance advantage.

 

 

A correct fit is vital while you’re not on the rink.

Before you start skating, make sure your skates are properly fitted and laced, regardless of whether you rented them or bought them. Don’t be afraid to ask for help from a rink employee. Your skates should fit snugly, but not so tightly that they cause discomfort.

The Entrance Door may be found.

A soft mat or carpet encircles the skating surface in most circumstances, making it safe for visitors to walk to the rink’s surface. Ice skate blades are also protected by the mat. If you have your own skate guards, you should wear them while skating on the ice. Remove your skate guards and put them on your feet just before you hit the ice. Never walk on concrete or wood while wearing skates.

Keep a firm hold on the handrail and your feet firmly planted on the ice.

Some skaters are overjoyed to get onto the slippery ice, while others are terrified of losing their footing and collapsing. Using the rail can help you become used to skating on the ice, especially when you begin making your first moves.

Avoid getting too close to the railing.

Once you’ve got up the courage to do so, step back from the railing. Just a little of flexion at the knees will do. Make sure your hands and arms don’t wobble.

Practice falling and getting back up after a fall on the ice.

You can better prepare yourself for the inevitable first fall if you practice. Bend your knees and squat into a dip position. To prevent banging your head on the ground, lean slightly forward and to the side when you fall. Put your hands in your lap and make a fist. On your hands and knees, please. The palms of your hands should be placed on the sole of one of your feet. Grab the second foot and place it between the palms and index fingers of your hands. Make sure you’re fully upright by standing up.

Make a decision and go forward.

Having mastered the technique of falling and rising from the ground, it’s time to move on to more difficult challenges. In the beginning, begin by marching in a straight line, then change direction. Take little “scooter” steps, one foot at a time, as you go ahead. Afterwards Pretend you’re riding a scooter along the street in order to burn some calories. Place your arms in front of you on imagined scooter bars to keep your balance. After you’ve become accustomed to taking scooter steps, you may experiment with alternating them. Step forward with your right foot, pause, and then step backward with your left foot. Repeat this process with the other foot. Skating around the rink while shifting your weight from one foot to the other is a wonderful kind of workout.

Keep It from Happening in the First Place

To make a little quantity of snow on the ice, spread your feet apart and utilize the flat of the blade before coming to a full stop like a snowplow. Inwardly pointing toes (pigeon-toed). Skiing is a good analogy for this.

Learning to Glide on Two Feet is an excellent life skill to have.

Then you may “relax” by marching or striding on the ice. Glide forward on two feet for a short distance, then halt.

Take a Breather

Squatting as far as possible in a dip to prevent falling off the skateboard. The arms and the back should be level while doing this exercise. To warm up your knees, use this exercise. Do a dip from a standing posture as a starting point. As long as you’re comfortable gliding forward on two feet, you may start practicing dips while moving.

Enjoy yourself when you’re out on the ice skating.
Because ice skating is fun, take advantage of the opportunity while it’s available. Skating games and tricks like spinning, going backwards, going forwards on one foot, and executing swizzles forwards and backwards may be attempted when you have learned basic skills. In addition, after you’ve learned the basics, you may either continue skating moderately around the rink or switch to figure skating or ice hockey.

Final Thought
Finally, you must conquer your aversion of falling. Get some skating practice in while you can. In the beginning, it will be tough and painfully slow. In addition, you may slip a few times, but don’t give up! You’ll be awestruck by the simplicity with which you can do jumps, spins, glides, and glides. You need to grab your skates and get out of here now. Enjoy your time on the ice!

How to turn on a skateboard

How to turn on a skateboard

Turning on a skateboard is made as simple as possible by leaning your weight into your toes and heels.

When you’re riding a skateboard, you have a number of options for shifting direction.

The simplest method of turning is to apply pressure to the skateboard edges/rails with your toes or heels while standing on your skateboard.

To put it another way, you’ll be putting more weight on one side of the board or the other in order to control which direction we’ll go.

It’s a subtle but extremely effective weight maneuver that’s identical to the one used in surfing and snowboarding to make lines on the water and in the snow to draw lines on the ground.

Per Welinder, author of the book “Mastering Skateboarding,” points out that skateboards do not come equipped with steering wheels.

It is possible to steer by shifting your weight on your feet until the wheels are pointing in the same direction as the movement of your body.

“When the board is pointing in a direction that is different from the direction in which your body is traveling, you must align the two or you will fall off the board.”

Turning your skateboard by leaning on the toe or heel of the board is the quickest and most efficient method.

If you’ve mastered the kickturn, you might wish to try the tic-tacs and the kickturn again.

If your board isn’t moving or is moving extremely slowly, the kickturn is the greatest technique to make a swift change of direction, as is the case with the kickturn.

Trying to lean the skateboard while moving at a slow pace may prove to be a challenge.

Nonetheless, the basic skateboarding turning technique is always beneficial, regardless of one’s level of competence.

If you’re driving down a steep street or mountain road, tilting is usually always the only option if you want to avoid crashing into something.
You also lean to turn and carve across the flat smooth ground, a bowl, a ramp, a half-pipe, or any other rideable surface.

Turning on a Skateboard

Are you prepared to do faultless, smooth turns on your skateboard?

Here’s how you go about it.

  1. Skateboard at a reasonable speed while pushing the board;
  2. Make certain that your back foot is straight off the ground and that your front foot is slightly inclined over both the back and front bolts.
  3. Keep your knees bent and your weight on the balls of your feet while keeping your center of gravity centered on the board.
  4. To do a backside turn, bend toward the toe side of the board and move your weight to the front side of your feet’s balls of feet.
  5. To do a frontside turn, apply pressure to the heel side of the board, allow the shoulders to turn with the curve, and maintain a bent knee position.

6) Allow the body to turn slightly into the turn in both circumstances.

  1. Make an effort to maintain a balanced weight distribution between your front and back feet.
  2. Make a couple of “S” bends, alternating between turning left and right;

9, the sharper your turn will be, the more pressure you put on your toes and heels.

  1. Practice your first wide carving turns with cones or other innocuous impediments to get you comfortable.

Extra Tip

Riding a skateboard around a turn can be either easier or more difficult depending on how tight the kingpin on the trucks is tightened on the board.

The more loose your trucks are, the more quickly and easily you will be able to turn them.

A skateboard that is overly loose, on the other hand, becomes difficult to ride, if not impossible to ride.

You must fine-tune and discover the optimal balance for your riding style because every skater has a different tightness preference level.