HowTo Ollie Fingerboard?

The Ollie is one of the most important tricks to learn for fingerboarding. A trick that is done by putting pressure on the tail with the back finger to get a solid pop, then moving the front finger toward the nose with a flick of the wrist to level the board in the air. For a smooth landing, equal pressure is put on both fingers as the object falls through the air.

  • Place your index finger between the middle of the board and the nose. Keep your middle finger on the tail of the board for pop.
  •  Popping the Tail: Put pressure on the tail with your back finger for a solid pop that makes the board go vertical.
  •  Flicking the front finger and wrist up and forwards: When the board is vertical after popping, moving the index finger up toward the nose will make the board rise up for air. Focusing on moving the whole hand and wrist instead of just the index finger is a great tip for getting the board to air.
  • Leveling the board in the air: To level the board, turn your wrist back horizontal and let your middle finger control the tail of the board.
  • Landing: Press down evenly with both fingers as the board goes down in the air for a smooth landing.

Learning the Ollie on a fingerboard can take time and patience. It’s all about timing the five steps above correctly and building “muscle memory” for it. With enough practice, you’ll be able to do the Ollie on a fingerboard with your eyes closed.

Advice on how to work on the Ollie move

Using the table’s arm, leg, or edge

Use the edge of a table, your arm, or your leg to practice the Ollie and get a feel for how it moves as a whole. The point is that you can pop too far backwards, letting the board rest upside down on the ground. This makes it easier to bring the board up into the air.

Ollieing on a fingerboard and not getting air

At first, it can be hard to do Ollies on a flat desk by yourself. A great tip is to find something to jump over or up on. If you’re just getting started, I’d suggest finding something to ollie up on. It could be a book or a small cardboard box, or anything else you can find around the house that will work. As you get better, it’s easy to stack more books or boxes on top of each other to make your goal height go up. Ollie can also be practiced over small things like another fingerboard, a pen, or cables.

#Board going out of bounds at random

When trying to Ollie, it can be hard to keep the board in your hands sometimes. Here, a good tip is to try not to pop as hard while flicking the front finger and wrist forward and up for air. If you lose contact with the board while trying to Ollie, it’s easy for the board to spin out of control.

I hope that these tips will help you learn how to ollie on a fingerboard. Remember that it takes practice and patience to perfect the ollie, but with time it will come.

Ollie in Manuals

If you can Ollie the fingerboard up on obstacles, you can try new things. One is to start using manuals in combos.

Ollie over gaps

You can make a drop, a gap, or a small set of stairs for Ollie out of books or boxes. Starting small and growing from there can be helpful. As you get better at controlling the board, you can even start to ollie off the edge of the desk and land on the floor, though it might take a few hits to get the board under control in the air.

Ollie into Grinds

You can also Ollie up on obstacles to lock into grinds. This can be, for instance, the edge of a box where the fingerboard’s truck grinds.

Frontside and Backside 180 Ollie & Slides

You can learn variations like the Frontside 180 Ollie and Backside 180 Ollie, which involve doing an Ollie while turning your hand 180 degrees with the board. This is especially helpful for sliding on things that are in the way.

This is because slides like the board-nose- and tailslide often require turning 90 degrees so that the part of the board that touches the obstacle can slide.

How to ripen an avocado in the microwave

Is the texture of your avocados unsuitable for making a batch of guacamole, but they are not yet ripe enough to slice and sprinkle on a salad? There are times when the avocado is simply too tough to use; therefore, I was wondering if it is possible to ripen avocados in the microwave in just two minutes.

It is possible to ripen avocados in the microwave, which is a useful technique to have if you intend to make guacamole. The microwave can be used to help soften the texture, but it does not give the avocado the same flavor as naturally ripened avocados, which is nutty, creamy, and buttery.

The avocado must be slightly underripe and have some degree of firmness in order for the microwave method to work. So, when you put an avocado in the microwave, what exactly does it turn into?

What happens if you microwave an avocado?

An avocado will either soften or explode in the microwave, depending on how much you microwave it and how long you microwave it for.

Ripening of avocados occurs as a result of a chemical reaction. It’s the ethylene gas that ripens avocados into their nutty flavor and creamy texture.

When heated in the microwave, an avocado can explode if it is securely wrapped. A buildup of gas and steam inside the fruit leads to a rupture of the fruit’s skin.

Subscribe to Microwave Meal Prep!

Get updates on the latest posts and more from Microwave Meal Prep straight to your inbox.

To avoid this explosion, there are two things you can do before microwaving an avocado:

  • Stab the avocado 3 times with a fork or knife to pierce the skin into the fruit to vent the gas, steam and pressure. 
  • Cut the avocado in half and remove the pit. 

It’s important to acknowledge the two potential risk might happen while you are microwaving an avocado. Be cautious and reheat with short increments. 

If you at all feel uncertain, then maybe the microwave method is not for you. For best results, just give it time and naturally ripen the avocado in a paper bag on the counter. 

How do you ripen avocado quickly?

What are the most important things to quickly ripen an avocado without heating it totally in the microwave. In order to correctly soften avocado in the microwave, you must first know the microwave power level and wattage.

You may fast ripen avocados in a 1000-watt microwave by utilizing the low power option for 15 to 20 seconds at a time. After each interval, check the avocado and repeat if necessary.

Using a 700-watt microwave, reheat or soften the fruit in 30-second intervals using the medium power level and being cautious.

Avocados should still be allowed to naturally ripen in a paper bag at room temperature. Avocados may be easily softened for guacamole in the microwave, as well as released from their skin, making it easier to peel.

Can you ripen an avocado after cutting it?

Squeezing an avocado to see whether it yields slightly and has rough texture on the skin is the easiest way to determine if it is ripe.

It can be difficult to tell if a fruit is ready to eat because of its thick, tough peel. Is it possible to ripen an avocado after cutting it open if the fruit isn’t fully ripened?

It’s simple to keep an avocado from ripening and developing taste if you open it too early.

To keep the avocado from turning brown, massage the flesh with a little lime or lemon juice. Wrap the avocado in plastic wrap and store it in the refrigerator until ready to eat. Within a few days of cutting the avocado, it is recommended to use it.

Can you microwave frozen avocado?

Avocados that have been frozen can be used to make delicious guacamole, salad dressings, and smoothies, in addition to other dishes such as condiments, sauces, and spreads. It all boils down to whether you want to thaw or defrost the avocados, because that decision will determine what you make with the frozen avocados.

Avocados that have already been prepackaged and frozen typically come with microwave cooking instructions. Avocado pieces, on the other hand, become overly heated very soon and damage the texture of the dish.

It is recommended that you remove avocado chunks from the freezer and allow them to defrost on the counter. It just takes approximately an hour to completely thaw when the temperature is at normal temperature.

 

If you have to use the microwave, the defrost or low power setting is the one you want to utilize. To get the greatest results while defrosting frozen avocados in the microwave, nuke them for intervals of 30 seconds each.

Things you need to know before microwaving avocado

There are many tasty dishes you can make with a ripened avocado. What you are doing with the microwaved avocados ultimately makes all the difference.

Change up the power setting and cook time to avoid overheating the avocado resulting in a potential explosion. 

Here are things you need to know before ripening an avocado in the microwave:

  • Microwaving an avocado is only heating the flesh.
  • Microwaving unripe avocado to soften will result in a different flavor compared to naturally ripened ones.
  • Remove the pit before microwaving, it can interfere in the evenly distribution of heat around the fruit. 
  • Use microwave-safe plastic wrap, parchment paper or paper towel.
  • Place the skin of the avocado down when heating in the microwave. 
  • Prick the avocado skin before microwaving, if the skin is not pricked then the fruit can explode while heating. 

Regardless of what method you choose to ripen an avocado, the best way is to go natural, especially if you are looking for a fresh slice of avocado on your salad or sandwich. However, if you are looking to make guacamole or blend into a spread or sauce, use microwave to soften avocado in 2 minutes or less.

See more: bestkitchenproducts

How to Turn Off iPhone Headphone Safety

If you have an iPhone and use headphones to listen to music, you’ve probably seen a “Headphone Safety” message.

If a sound has been too loud for a long time, the iPhone’s Headphone Safety feature alerts the listener and automatically lowers the volume. This feature is meant to protect your hearing from long-term damage caused by loud sounds.

Even though you can raise the level again, the Headphone Safety feature can be annoying and inconvenient, especially when you use Bluetooth speakers instead of headphones to listen to music.

You can turn off Headphone Safety if it has been automatically lowering your sound levels. Here’s what you need to do.

How to Safely Turn Off Your Headphones

If you often listen to loud music with headphones on, we don’t think you should turn off Headphone Safety on your iPhone. What is safety for headphones? If you listen to loud music for a long time, it can hurt your hearing in the long run. Instead, use the Reduce Loud Sounds feature to raise the decibel level. The default decibel level for your headphones is 85, but you can change that with this feature.

Apple suggests that you change your device type to “Speaker” if you use Bluetooth speakers that aren’t built into your phone. You can listen to music at louder volumes without turning off the Headphone Safety feature if you choose either of these two options.

There are two ways to turn off Headphone Safety if you still want to. Do these things:

  1. Click on Settings.
  2. Tap Sounds and Feel.
  3. Tap Headphone Safety next.
  4. Turn off notifications for your headphones.

or

  1. Click on Settings.
  2. Click on Accessibility.
  3. Tap Audio/Visual when you get to the section about hearing.
  4. Turn off notifications for your headphones.

How to Turn Off Safety on Headphones

iPhones with locks

In some countries or regions around the world, you can’t turn off the Headphone Safety notification feature. Also, you can only see the slider to turn off headphone notifications on an iPhone that has been unlocked. But there is a small way around this.

You can change the type of Bluetooth device if you can’t turn them off in your country or region. If you change the device type from “Headphone” to “Other,” notifications won’t be sent to your headphones and your volume won’t be automatically turned down.

How to Change the Type of a Bluetooth Device

  1. Go to Settings from your home screen.
  2. Select Bluetooth.
  3. Click the “I” button next to the device that you want to change.
  4. Tap Type of Device.
  5. Choose the item from the list. Here’s what you can do:
    • Car Stereo
    • Headphone
    • Hearing Aid
    • Speaker
    • Other

Follow the steps above if you ever want to change the type of device again.

How to Turn Reduce Loud Sounds on or Off on an iPhone

You might prefer to turn on or off Reduce Loud Sounds instead of turning off Headphone Safety. When this feature is turned on, you can set a maximum decibel level. This setting shows how decibels compare to each other. On the low end, decibels can only be as loud as a vacuum cleaner, and on the high end, they can only be as loud as an ambulance siren. If you turn on these settings, you might get less Headphone Safety notifications.

  1. Click on Settings.
  2. Tap Sounds and Feel.
  3. Tap Headphone Safety next.
  4. Slide the Reduce Loud Sounds button to turn it on or off.

What is safety for headphones?

If you listen to too loud of music on your headphones for too long, it can hurt your hearing. Headphone Safety is an iPhone feature that lets you know when your headphones are on and off. It helps you protect your hearing. If you’ve listened to too much sound in the last 7 days, you’ll get a message telling you to turn down the volume.

After you get the message, the next time you plug in your headphones or connect them over Bluetooth, the volume will be turned down automatically. Only audio falls under the exposure limit. Phone calls don’t count toward how much sound you hear through your headphones. If your iPhone is turning off when a call comes in, there is a way to fix the problem.

How to keep your iPhone from putting calls on mute

Many people have problems with their iPhones where calls that come in are muted and sent straight to voicemail. If you are sure that Do Not Disturb is not turned on, you can try a few things.

First, make sure that neither “Silence Unknown Callers” nor “Call Forwarding” is turned on. Both can be found here:

  • Click on Settings.
  • Click Phone.
  • Scroll down and turn off “Forwarding Phone Calls.”
  • Scroll down and turn off “Silence Calls from Unknown Numbers.”

When Silence Unknown Callers is turned on, calls from unknown numbers, such as those from telemarketers and scammers, will go to voicemail. If you think you might get a call from a real unknown number, you should probably keep this option turned off.

If that doesn’t fix the problem, check the Screen Time setting.

  • In Settings
  • Tap Screen Time
  • Then tap Communication Limits and, if asked, enter the passcode.
  • Everyone should be chosen for both During Screen Time and During Downtime.

During Screen Time and Downtime, you can block some phone calls if you have Screen Time turned on. Set both to everyone to make sure you don’t miss any calls.

If you’re still having trouble, the Do Not Disturb setting is the most obvious place to look. You should turn this off. Also, make sure that your volume isn’t turned all the way down to 0.

 

The Top 3 Best Lights For Boosted Boards. Night Riding.

Getting a set of headlights and taillights for your Boosted board is one of the best things you can buy for it.

Lights can save your life when you’re riding at night.

Being seen can mean the difference between getting home safely at night or going to the hospital.

Remember that your safety is your own and no one else’s…

Don’t think it’s a given. Take the time to buy lights if you ride at night.

It can be hard and tricky to find the best lights.

Avoid going on Amazon… There are a lot of cheap lights that have bad reviews.

But don’t worry, we’ve found the three best lights for your Boosted Board.

Let’s get started!

1.Shred Lights SL-200 Combo Pack

The SL-200 is without a doubt the best light you can buy for your boosted board.

Depending on the mounts you get, the retail price starts at $99.

And yes, they work with all models of Boosted boards:

  • Boosted Stealth
  • Boosted Plus
  • Boosted Mini X
  • Boosted Mini S

For many reasons, the SL-200 are the best lights for your Boosted board.

First, how long it lasts.

Try to guess how long they will last…

Five hours, ten hours, or twenty?

Try closer to 150 hours… That’s right, these bad boys can run for more than 6 days straight at the most.

The best part is that they can be fully charged in only 2 hours.

You can go for long rides on your board knowing that you’ll be visible the whole time… No need to worry about charging while on the go!

There are also 6 different light modes on the SL-200.

  • Low Beam
  • Medium Beam
  • High Beam
  • Low Flashing
  • Medium Flashing
  • High Flashing

You can choose from 3 different ways to flash or 3 different ways to keep the light on.

Use the flashing modes if you are really worried about being seen. With all those flashing lights, drivers will have no choice but to notice you.

Use a steady beam if you just want to light up the area right in front of you.

Overall, for $99, you get a pretty good deal.

There are no other lights like this… (do not shop on Amazon).

What’s in the box:

  • (2) White SL-200 Lights (Headlights)
  • (2) Red SL-200 Lights (Taillights)
  • (2) Dual Micro USB Charging Cables
  • (2) Pairs of mounts of your choice
  • (3) ShredLights Stickers
  • 30 Day Money Back Guarantee
  • 90 Day Warranty

The Shred Lights are also very simple to set up.

The SL-200 lights are attached to mounts, which you put on the trunks of your cars.

First, unscrew the nut that’s holding your trunk in place and slide the mount on. You can then put the nut back on and slide the lights onto the mount. Simple as that.

Here’s a video that will show you how to do it.

As was already said, each board has a different amount of room for the lights under it.

So, you have to buy the right kind of mounts to make sure the lights will fit.

But don’t worry, we’ll take care of you…

Both the Boosted Plus and the Stealth have Standard Mounts in the front and Angled Mounts in the back. (Standard/Angled)

Standard Mounts will fit on the front of the Boosted Mini S and X, and Extended Mounts will fit on the back. (Standard/Extended)

Just make sure that when you check out, you choose the right option!

Overall, these are by far the best lights on the market and come highly recommended to keep you safe.

Joshua I Parker Photography

2.Illume V2 E-Board Headlight And Taillight

This is a fascinating situation.

These lights are not made by a company, but by a single person.

You can find these lights at GenexDesigns on Etsy…

With over 51 reviews giving these things 4.5 out of 5 stars, you can trust them.

Starting at $51.99, the combo set includes both the front headlight and the back taillight.

What’s interesting about these lights is that, unlike most electric skateboard lights, they’re not attached to the bottom of the board. Instead, they’re attached to the top deck of the board.

In the same way, they go on mounts that go on your trunks, but this time they go on the top of your deck.

I’m not sure how this will change the way you ride now. It’s possible that the lights will make it hard for you to keep your feet on the ground.

But from what people have said, it seems like everything is fine.

Sam Wiewel is the owner of Genex Designs. He is so sure of the quality of his mounts that he guarantees them for life.

As for the lights themselves, they do an excellent job.

The headlight can be turned on in four different ways. Three steady beams and one that strobes. Here is how long the battery lasts:

  • 5 hours on max
  • 4 hours on medium
  • 8 hours on low

The best part is that the light can shine up to 150 feet away and be seen from more than a mile away…

The Blitzu 168T taillight is made by the company Blitzu.

The light was originally made for bicycles, but it works great as a light for your Boosted board.

The tail light has 6 different modes of brightness and flashing, as well as different battery life:

  • 5 hours on max
  • 6 hours on low

It takes less than an hour to fully charge. It shines light 15 feet behind you and lets people see you from more than 300 feet away.

With all of the features it has and the fact that it only costs $52, I’d say this light is a steal.

The only thing I don’t like is that shipping can take up to two weeks, depending on where you live, unless you pay extra for faster shipping.

3.Koowheel LED Lights

Koowheel LED Lights are last but not least.

You can get one of these from Amazon for $22.99.

A lot of the electric skateboard lights on Amazon are pretty low quality and have pretty bad reviews.

Overall, 3.5 out of 5 stars are given to the Koowheel lights.

Even though these lights are ranked third, there are a lot of bad reviews about broken brackets, lights that won’t turn on, and other problems.

This is the best choice if you’re just looking for lights based on price and saving money. But it might or might not be good.

There are 4 lights in the package:

  • 2 front headlight
  • 2 rear taillights

They have two ways to light up: a steady high beam and a strobe. It takes 1 hour to fully charge, and then it will work for 4 hours straight.

They can also stand up to water and work well in bad weather.

Few Choices Are Available

If you read my last article about electric skateboard lights, you’ll know that there aren’t many ways to light up your Boosted board.

We should have more choices.

Shred Lights is the clear winner, but the market needs more competition to get things moving.

If you don’t want to spend money on lights that go on your electric skateboard, you can buy other things, such as:

  • Neon Vests
  • Reflective Patches and Bracelets
  • Helmet Lights

The best way to make yourself more visible is probably to use lights. Here are some other ways.

Remember that your safety comes first… don’t just assume people can see you.

 

Headset VS Headphone VS Earphone

When trying to choose the right audio equipment, do you ever feel overwhelmed?

Headsets, headphones, and earphones are all types of audio equipment that let you listen to music and other sounds. Do you know what a headset, headphones, and earphones are?

If you can’t decide between headsets, headphones, and earphones, don’t worry. This post will help you understand the differences between headsets, headphones, and earphones.

Earphone vs. Headset vs. Headphone Which One Is Best?

What is Headset?

A headset is a set of headphones and a microphone that you put on your head. Headsets can be wired or wireless, and most of them have a microphone built right in.

People use headsets for gaming and Skype calls because they let you hear and talk without having to hold anything.

Does the headset have a good sound?

Some headsets can have good sound quality, but it depends on the headset. For example, computer gaming headsets won’t be able to match the sound quality of high-end headphones. But the sound quality of most headsets will be better than that of earphones.

What does “active noise canceling” mean on a headphone?

Some headsets have a feature that gets rid of noise by itself. This feature makes it easier to hear less of the noise around you, which makes it great for use in noisy places.

What does “passive noise canceling” mean on a headphone?

Passive noise cancellation is the standard way that a headset gets rid of noise. So, headsets will be able to cut down on some noise.

Can you listen to music on a gaming headset?

Most gaming headsets are not made for listening to music, but some do have good sound quality. Check out our blog post about the best headphones for music if you want to find headphones that are made for music.

Are headsets for video games good for movies?

Most gaming headsets can also be used to listen to music and watch movies. But if you want surround sound, you might want to look into a surround sound headset.

Tai nghe headphone vs earbuds

How do headphone work?

A headphone is a single piece of equipment that goes on or over your ears. Headphones can be either wired or wireless, and they can have open or closed backs.

Open-backed headphones let sound escape from the ear cups, so the sound you hear is more natural. Most outside noise is blocked by closed-back headphones, which are great for listening in noisy places.

What are headphones that go over your ears?

On-ear headphones, also called “over-ear” headphones, sit on your ears instead of around them. They make the sound more open and let more outside noise in.

What are headphones with a closed back?

Closed-back headphones fit snugly around your ears and block out all outside noise. Closed-back headphones block out the most noise and are good to use in loud places.

What are headphones with an open back?

Open-back headphones let sound escape from the ear cups and give a more natural sound experience. They do not block out as much noise as closed-back headphones, though.

When listening to live music, wireless headphones sound best.

When listening to music, wireless headphones can give you great sound quality, but this will depend on the type of headphones you buy.

Most headphones will sound a little bit worse than wired headphones. If you buy headphones with open backs, the sound won’t be as good as if you bought headphones with closed backs.

Which is better for gaming: headphones or headsets?

There is no one right answer because it depends on what you like. Some people like headsets because they have a built-in microphone and controls for the volume, while others like headphones because the sound quality is better.

What is an earphone?

A small, portable audio device that fits in your ear canal is called an earphone. Earphones can be wired or wireless, and most of them have a microphone built right in. People often use earphones to listen to music on the go because they are small and easy to carry.

Is there a microphone on the earphone?

Most earphones have a microphone that is attached to the cable. This means that when you talk, the microphone will be close to your mouth, so the sound will be clear.

Are there different sizes of earphones?

Earphones don’t come in different sizes, but they do come in different shapes. Ear tips for wireless headphones come in different sizes, giving you more options.

Headphones and earphones: Are they the same thing?

You can listen to audio with both headphones and earphones. Earphones sit in the outer part of the ear, while headphones go over the head.

Earbuds vs. earphones?

Earbuds and earphones are not the same thing. Earphones fit inside your ear canal and sound better than earbuds. Earbuds sit just outside your ear, and they don’t make as good of sound as earphones.

What are earbuds that are truly wireless?

True wireless earbuds are a type of earphone in which the left and right earpieces are not connected by a wire.

Instead, they use Bluetooth to connect to you and each other. This gives you the freedom to move around without worrying about getting tangled in cords.

So, what is the best audio device for you?

It depends on what you want and what you need. A headset is the best choice if you need something that can both listen and let you talk. If you want to listen to music on the go, a headphone or earphone is a good choice.

What does noise isolation by passive means?

Passive noise isolation is the standard way that headphones block out sound. This means that headsets can cut down on some noise, but they can’t completely block out all outside noise.

What is “noise cancellation that works?”

Some headsets have a feature that gets rid of noise by itself. This feature makes it easier to hear less of the noise around you, which makes it great for use in noisy places.

The ear canal is what?

The hollow passageway that leads to your eardrum is called the ear canal. To listen to audio, you can put an earphone or a headphone in your ear canal.

Are ear canals different sizes?

The shapes of people’s ear canals are all different, but they are all about the same size. This means that most earphones and headphones should fit comfortably in your ear canal.

What is the ear’s outside?

The outer ear is the part of the ear that is on the outside. This includes the tragus, the anti-tragus, and your earlobes. They don’t change how well audio devices sound in any way.

What are earbuds or headphones?

Ear-worn speakers are a type of headphones with two speakers that send sound into your ear canals. These headphones don’t block out noise, but they do make a sound that is fuller and richer than most headphones.

Do over-the-ear headphones sound better than on-the-ear ones?

On-ear headphones and over-ear headphones have the same sound. The difference between on-ear and over-ear headphones has nothing to do with how well they sound.

Over-ear headphones are bigger and go all the way around your ear. On-ear headphones are smaller and sit on top of your ears.

Headphones that cancel out noise on their own are cheap?

No, passive noise cancellation is something that comes with every pair of headphones. Only headphones that don’t have active noise cancellation are cheap.

Conclusion

Now that you know what headsets, headphones, and earphones are, you can choose the right one for you. A headset is best if you need to talk and listen at the same time. Earphones or headphones are the way to go if you want something small and easy to carry.

FAQs on Headset, Headphone, and Earphone

Is it bad for your ears to wear headphones all day long?

No, wearing headphones won’t hurt your ears. But if you listen to loud music for a long time, you could hurt your hearing.

How long should you wear headphones each day?

The answer to this question depends on how loudly you play your music and how long you wear your headphones. For your own safety, you should always take breaks from listening to audio.

Do headphones hurt the brain in any way?

There is no proof that headphones hurt the brain. But listening to music or other sounds at a loud volume can hurt your hearing.

Which kind of headphones are best for kids?

To protect their hearing, kids should use headphones with a volume limiter. There is no way to turn up the volume on these headphones.

 

How many pins-does-my ram have? Let’s Get Things Straightened Out!

You may not be aware of the fact that your RAM is made up of pins. Pins are found on every type of RAM, regardless of the model. These are the components of a RAM that are necessary for it to function correctly. However, many of us are unaware of the number of pins in a computer’s RAM memory.

My RAM has how many pins? DDR4 SDRAM, with its 288 pins, is the most widely utilized form of DRAM. Another thing to keep in mind is that the pin count for SO-DIMMS is 260, while DDR2 RAM and DDR3 RAM each have 204 and 288 pins, respectively. There are a variety of RAMs available on the market. RAMs come in a variety of configurations, each with a unique number of pins.

There’s always more to let go of and more power to wield. Each ram’s pin number, as well as the pin’s significance, will be presented to you. As a result, now is the time to get started.

Do I have enough RAM to run all of my programs?

RAM comes in a wide range of configurations. It’s important to be aware that no two models have exactly the same number of pins. If we look into it, we’ll discover that different RAM models have varied pin counts. We’ll now go over the most prevalent RAMs and how many pins each one has to offer.

Ram Model Pin Number 
SO-DIMMs 260 pins
DDR4 SDRAM 288 pins
DDR2 RAM 204 pins
DDR3 RAM 204 pins
DDR4 RAM 288 pins
SIMM 30 pins
DIMM 168 pins
SDRAM 288 pins

 

RAM versions with varied pin counts are available. It is mostly dependent on the number of pins that RAM has. Consider the number of pins the RAM has while you’re shopping for a computer or laptop.

It is impossible to use the same RAM across several devices. Restriction is one among them. If you want to use 240 pin RAM, you can only use it on a computer. 204 pin RAM, on the other hand, is ideal for laptops. This means that when purchasing RAM, especially if you are building your own computer, you must pay attention to the pin number.

Is the Number of RAM Pins a Factor in Performance?

To some extent, the answer is yes, but not always. If you have DDR4 RAM installed, the answer to this inquiry is “no”. When it comes to the specifications and quality of DDR4 DIMMS, they all meet the same criteria.

Alternatively, if you don’t use DDR4, then the answer is “no.” Other RAM’s quality is determined by the number of pins it has. The more pins you have, the more options you have.

There is also the fact that not all RAM types are compatible with all devices. Because a 204 pin RAM is only ideal for laptops, you cannot use a 204 pin RAM in a computer.

Also, laptops cannot use 240-pin RAM because it is designed for desktop computers only. As a result, the RAM’s pin count is critical to performance. Although specs and performance are also affected, this is a significant issue.

To locate the RAM pin on your laptop, follow these steps.

It’s critical to know what your RAM’s PIN number is. Without knowing the pin number, you can’t do a lot of things. Furthermore, without the pin number, you will be unable to do some future upgrades. As a result, we’ll walk you through the steps necessary to discover your laptop’s RAM pin number.

It’s a rather straightforward process. There are only a few steps you need to take to discover this. Taking a closer look at the process:

  • Step 1 – To begin, you’ll need to go outside of your laptop and into natural light. System information will then be displayed. 
  • Step 2 – There is a section devoted to RAM in the system information. Your RAM’s storage, PIN, and other data are all found in this section..
  • Step 3 – The PIN will tell you what kind of RAM your laptop has. This will allow you to simply increase the device’s specifications without having to remove any of its components.

How Much Difference Is There Between 204 Pin and 240 Pin RAM?

All RAM isn’t created equal, and 204 and 240 pin RAM are two different beasts in that department. Which one, then, should you go with? What is the answer to this question?

When utilizing a laptop, you should utilize 204-pin RAM instead of 168-pin. Because 204-pin RAM is required for the operation of a laptop. 240-pin RAM is required for a computer, hence a 204-pin RAM will not work.

Some specifications of the 240 pin RAM make it superior to the 204 pin RAM, while the difference depends on the device. 240 pin RAM is not backwards compatible with 204 pin RAM in the first case.

The speed is also a big factor here. The new 240 pin RAM is a huge improvement because of its remarkable performance. As a result, 240-pin RAM is clearly superior to 204-pin RAM. Ultimately, though, the decision comes down to what you want.

My RAM PIN number is not showing up on my computer screen.

To accomplish this, you’ll need to go through the same set of steps as before. There are a few things you can do:

  1. Open your computer or laptop first.
  2. The command prompt is the next step.
  3. Run as administrator by clicking the top result and selecting the option.
  4. You’ll notice a section labeled RAM after that. Your RAM’s specifications and information can be found in that area.

Wrapping up:

Your device’s most critical component is its RAM. The RAM is the backbone of the entire storage system.

By this point, you should be familiar with the question, “How Many Pins Does My Ram Have?” If you want to upgrade your RAM or know exactly what your gadget is capable of, you’ll need to know how many pins it has.

Despite the fact that we’ve provided pin counts for a number of popular rams, be sure to double-check your own RAM’s model number before adopting our suggestions. You can also check if your ram is missing from the list by following our manual procedure.

We’ve also discussed some critical difficulties that are dependent on the amount of RAM. As a beginner or an experienced user, we hope you find this information useful. With this information, you’ll be able to solve a lot of problems.

 

How to change lawn mower tire

It is the ultimate dream of any gardener to have a perfectly mowed lawn that not only looks healthy and beautiful, but also provides the ultimate in convenience. Obtaining a level lawn, on the other hand, does not come on a silver platter. You should make certain that your mower’s blade is well sharpened and that you replace the mower’s blade as needed. Additionally, to ensure an even mow, you must ensure that the threads on your tires are in good condition. In this article, you will learn how to change a lawn mower tire quickly and easily with no hassle.
Change the tire on your mower on occasion, whether the thread on the tire has worn out or the tire has simply popped off due to wear and tear. Make an effort to complete this task before the start of the mowing season, just as you would with any other mower maintenance task.
Fortunately, changing a lawn mower tire is a simple process that only requires a few minutes of your time. It only takes a few tools and replacement parts that have been approved by the manufacturer to complete the job. This post will not only answer all of your questions about how to change a lawn mower tire, but it will also provide you with unrivaled insights into the topic of lawn mower tires. Please continue reading.

Signs It’s Time to Change a Lawn Mower Tire

Worn down thread. When you’re mowing the lawn, be sure to check the thread frequently to make sure it’s in the proper condition.
Presence of dry rot problems. Tires should be checked for dry rot and cracks in the rubber on a regular basis. Tires become unreliable as a result of dry rot, and they may even blow out.
Significant wobbling of the lawn mower.However, even though mowers are designed to wobble slightly, if the wobble becomes significant, your lawn may take on the appearance of someone who has a bad haircut. That’s something you don’t want, do you? As a result, inspect the axle nut on a regular basis and make any necessary adjustments to ensure there is no tire deformation. In the event of uneven tires, they should be replaced.
Need to frequently fill the tire. This is a warning sign that there is a hole in the tire because you shouldn’t have to refill the tires on your lawnmower so frequently. Tire sealant can be used to patch holes in your mower’s tire if it needs to be refilled frequently.

How to Change a Lawn Mower Tire?

Requirements

New lawn mower tire
50/50 dish soap & water mixture
Pair of pliers
Valve stem tool
Tire pressure gauge
Paint brush
Floor jack
Jack stands
2 large slotted screwdrivers
Air compressor
This will also save money instead of hauling you machine to the mechanic.
An assortment of wrenches-these will depend on the size of the tire’s nuts
A little time.

Let’s do it together

Step 1: Disconnect the Spark Plug

With the lawn mower parked flat on an even surface, proceed as below.
Block the tires that don’t require any replacement to prevent the mower from rolling.
Position your floor jack under the frame.
Jack up the mower to raise the tires you intend to change off the ground.
Once it’s secure, place the jack stand underneath to support your mower.
Remove the jack

Step 2: Lift up the Mower

With the lawn mower parked flat on an even surface, proceed as below.
Block the tires that don’t require any replacement to prevent the mower from rolling.
Position your floor jack under the frame.
Jack up the mower to raise the tires you intend to change off the ground.
Once it’s secure, place the jack stand underneath to support your mower.
Remove the jack

Step 3: Before You Start To Removing the Tire

We’ll have to address some issues here before we can proceed, depending on the model of your mower. In fact, the front tires of some mowers may be mounted on spindles.
If this is the case, look for a rubber boot at the end of the spindle on your mower. Remove them first. A pair of pliers and a slow, gentle pull will accomplish this.

Step 4: Remove the Tire

This is where we can see the tire. With a tiny metallic C-clip, it’s usually held in place. Use a flathead screwdriver to remove it. Be on the lookout for this C-clip, as it has the potential to fly off. Before beginning any repairs, be sure to remove any keys holding the rim and axle of the tires together.
Remove the debris cap and washers from the tire. Make sure you get all of the washers. That’s a simple task for your hands to perform. Keys are accessible after removing the cap and washers. Remove the wheel’s pin with pliers, then slide the axle out of the way.

Step 5: Deflate the Tire

Unfasten and remove the valve stem cap.
Press a needle down to remove all the air therein.
Remove the valve core using the valve stem tool. Be keen in case there was some more air inside.

Step 6: Remove the Old Tire from the Rim

To let the tire slip off easily and prevent any possible damage to the rim, proceed as follows.
Using the paintbrush, apply the soap and water solution at the point where the tire and the rim meet. This is done to ensure optimal lubrication thus making its removal carefree.
Use two screwdrivers to pry beneath then work your way around it.
Apply additional water solution on the opposite side.
Using the screwdrivers, get the rim out of the center.
After the tire gets out, clean the rim with soap and water.

Step 7: Get the New Tire On

Start by lubricating the beads of the new tire with a tire lube or penetrating lubricant. As alluded hereinabove, dish soap and water solution serves this purpose. Apply an ample amount around the center of the new tire then:
Pry the tire open with the screwdrivers.
Slide the tire onto the rim at an angle of approximately 45 degrees.
Using the tire iron, force the rim into the tire and then continue to work the beads around it. You may apply more soap and water solution as needed.
If you have any inner-tube, insert if at this stage.
Secure the tire’s beads using the ratchet strap.

Step 8: Inflate the New Tire

Once everything is in place, proceed as follows.
Fix back the valve stem core.
Connect the air compressor’s hose.
Carefully pump up the tire to make it grip the rim firmly.
Continually check the tire pressure and pump it until it reaches the PSI range specified by the manufacturer.

Step 9: Reinstall the Wheel

Replace the washers and return the tire on the axle.
Fix back the C-clip and then the debris cap.

Step 10: Lower the Mower

Replace the jack under the frame and raise it while ensuring it supports the mower.
Slowly remove the jack stand and then set the mower back to its default position on the ground.
Finally, reconnect the spark plug and you’re done.
Even if you’ve got all the time in the world, you’ll want to avoid unnecessary lawn mower tire changes. As a result, you may need some advice on how to extend the life of your mower’s tires.

How to Make Your Lawn Mower Tires Last For Long

The beginning of mowing season is a good time to check on your lawn mower’s tires if you haven’t done so already.
Maintaining a regular schedule of inspections will help you identify any potential issues that could lead to costly repairs in the future. You’ll have a wonderful mowing season if you follow these tips to keep your lawn mower tires in top condition.
Proper Level of Inflation. The recommended pressure should always be found in the user’s manual. The ideal pressure range is from 18 to 22 pounds per square inch (PSI). Under- or over-inflation will result in premature tire wear and a reduction in your mower’s ability to grip when mowing up or down slopes.
Regular Inspection of the amount of Tire Threads.Wheel spin issues while steering can be caused by worn-down thread blocks. Check for dry rot and cracks in the remaining thread at all times. For a safe mowing, there should be about 3/32 inch of thread left. Threads that are worn out pose a risk.

Final Verdict

So, how did things turn out for you? We just hope that the process of changing your lawn mower tire went as smoothly as possible. Furthermore, we hope that your new tire is now comfortable in its surroundings and performs as expected. If there’s anything you think we should know, please let us know by leaving a comment in the section below. We’ll be delighted to receive your correspondence as well.

See more : Best lawn mowers for thick grass

 

CAN A TOASTER OVEN BE USED AS AN AIR FRYER?

TOASTER OVEN BE USED AS AN AIR FRYER

Several information

When we examined air fryers a while ago, we discovered that the majority of models were tiny and had strange futuristic designs. Due of their limited feeding capacity, the outcomes were less than desirable.. For those seeking for an air fryer, we believe that the Professional Series Toaster Oven & Air Fryer (although not perfect) is a better option than the majority of air fryers now on the market (despite the fact that it is not exceptional). Because the air fryer uses convection to cook, consumers will likely find toaster ovens to be significantly more convenient than they were before.

If you want the best of both worlds, the Professional Series toaster oven, which has all of the functionality found in air fryers as well as many more, is an excellent alternative.

In the past few months, there has been a significant increase in the number of toaster ovens marketed as air fryers.. We decided to put 10 different models through their paces in order to determine the differences between them and conventional deep fryers. Even the toaster oven came in first place! This convection toaster oven is still our top pick for the finest appliance for air frying food, despite the fact that it isn’t technically a “air fryer” after a thorough study of several models. Even an air fryer cannot compete with the performance of a convection toaster oven!

We found the 6-Slice Toaster Oven to be the ideal appliance for air frying, considerably better to the air fryers we evaluated due to its tremendous capacity, attachments, and diversity of speeds.

For air frying, the Toaster Oven 6-Slice is the greatest device we discovered. It outperformed all of the other air fryers we evaluated in terms of performance. There are also other handy extras included with the package. Crispiness and even cooking were superior in foods prepared in a Convection Toaster Oven compared to other methods. It is also more large and easier to use than a standard air fryer, with enough space to bake a 9-inch cake, a 13-inch pizza, or a 6-pound chicken without crowding the inside. The baking sheet, ceramic pizza stone, and two oven racks that come with it outperform the other air fryers we evaluated in terms of usable accessories. You won’t need to purchase any additional equipment if you utilize the Toaster Oven, which has all of the features of an air fryer and more. In the oven, a traditional 9-inch pan or cake pan will fit snugly and pleasantly.

In conclusion

In our testing, the Convection Toaster Oven proved to be the most effective pod-shaped appliance. It has a small footprint, is simple to use, and cooks food more evenly than other models (albeit it only produces results that are “more than adequate” at the very best). However, if you don’t have enough space or don’t require a lot of capacity, an air fryer such as the Toaster Oven may be a better option for you. We believe that most people would be happier and more comfortable with the larger cooking capacity and multiple cooking options of a convection toaster oven. Finally, we would only suggest purchasing the toaster oven air fryer if it is appropriate for your kitchen and lifestyle.

If you want to find more information, please see here!

How To Customize a Hoverboard?

Some people like to personalize their things to add their own touch and make something truly unique to them. A lot about who you are comes from the things you own.
Here, you’ll learn how to make your hoverboard unique. Add a little personality to your hoverboard with these cheap tips and tricks. You can add stickers, skins and do a lot of DIY custom ideas that will work for you.
If you are a parent, making things with your kids’ favorite toys is a great way to connect with them. It’s also a great thing for kids to do

Hoverboards that are made by you

All the hoverboards that are on the market may seem to look a little similar to each other. You can’t call a hoverboard unique if someone else bought the same model as you, even if you made it your own. If you want to make your hoverboard unique, you don’t have to spend a lot of money.
They may appeal to adults, but kids won’t be interested in them. Some companies, like Razor, make their hoverboards come in a lot of different colors so that kids can choose the one that looks the best to them.
It might not make a difference to teens or adults, but the color and design of their hoverboard make riding more fun because they can use their bright imaginations while riding.

1. Make Your Own Customization

Today, most people like to do their own things. It doesn’t matter if they’re painting their bedroom or making crafts out of wood, most people are now into DIY projects.
People who want to make their hoverboards unique can save money by making their own designs with cheap materials from the store or with things they already have at home.
Making a hoverboard your own lets you be creative. It’s also a fun thing to do with your child. DIY: You can use some of the following:
Stickers, colorful tape, and reflective tape are some of the things you’ll need to make your project look good.

It’s easy to find most of the materials you need for your DIY project at a dollar store near you. Your X-Acto Knife (2) will make it easy for you to cut the colorful and designer duct tape to fill in the parts of your hoverboard and make it look the way you want it to.

2. Make Your Own Hoverboard Skins

If you go online, you can look for custom hoverboard skins that will fit your model. You can also look for them. These skins are easy to put on, but make sure you get the right one for your board. Imagine that you buy a case for your new smartphone. They all work the same way.
You can buy hoverboard skins from Amazon or any other website that sells them. To look for a custom skin for your self-balancing smart scooter, type in the model number in the search bar, and then click search.
It’s easy to make your own skin for your hoverboard. There are a lot of designs to choose from, like floral prints, space design, camouflage, and many more!

3. Putting Stickers on the things you buy

The more stickers you have, the more you can cover the whole thing with stickers. Most stickers and decals can be found on Amazon or at any other online store like that.
In this case, the customization part is simple. So just stick them in any way you want to make the board look more interesting. To make your hoverboard look more like a race car, you can put decals on the top.

4. Decorate your Hoverboard

For extra fun, you could even paint your own hoverboard. It’s better to paint your own hoverboard than use pre-made skins or stickers. It will take a lot more work, but it’s also a fun thing to do if you have some extra time.
When you want to paint your hoverboard, you’re going to need these things:
Spray cans
Tape for painting or masking off (optional)
Before you paint your hoverboard, make sure that you tape off the parts that you don’t want to paint. Most of the time, you’d want to put tape on the LEDs, rubber foot pads, connection ports, and buttons.
Take care to make sure that every surface is smooth for a high-quality finish You can use sandpaper to make the surface of your hoverboard even.
All that’s left is to spray on the first layer of paint and wait for it to dry. When the first layer is dry, you can go ahead and spray the second layer of paint. To do one color or mix them up and use different colors in different places, you can.

5: Do all of the above things.

It’s also possible to mix and match to make your hoverboard unique. You can paint the hoverboard and put stickers on it, or you can buy custom decals and do some DIY work to make your own stickers. This does not matter how you make your hoverboard unique. Make sure you are happy with the end result.

Conclusion

You can have some fun by customizing a hoverboard. This is a way to add a personal touch and make the hoverboard your own. When you paint or add custom skins to a hoverboard, not only will it look better, but it can also hide scratches and dings. All of the ways are cheap and easy, so don’t forget to have fun!

How to change longboard bearings

If you’ve been longboarding for a while, there’s a good chance you’ll need to buy new bearings because of the wear and tear they’ll get. There will be a decrease in how well the board works if they don’t. If you replace them soon, it will be a huge help in getting the most out of it. The stability and durability of the parts of your longboard have a big impact on how well you can ride it. If even one part of your longboard bearings is broken, you will see a big difference in how well they work.

Longboard decks and parts are usually made of durable materials, but they need to be changed out at least once a year for safety and to keep the ride smooth. Another thing that needs to be changed from time to time is the bearings on a longboard. These parts must be replaced when they are worn out. You need to know how to do this.

 

Why do you need to change your longboard bearings?

It’s just as important to get the best longboard bearings as it is to have the best longboard bearings. First, let’s talk about why it’s important to change the bearings on your longboard before we get into how to do it. The main reason to get a new longboard is because it slows you down and it’s dangerous to ride a broken longboard. To slow down, the bearings on the longboards need to be changed when they get worn down. You’ll notice that your board doesn’t go as far after you push it hard.

Sometimes, when you try to take your board and spin your wheel by hand, the wear on the bearings speeds up even more quickly. When you don’t change the bearings, your safety is also at risk. They could get stuck. The seized bearings could cause your wheel to fall off, which could loosen the axle nut.

 

How can you tell if your longboard bearings have gone bad?

There are three ways to tell if longboard bearings are bad.

  1. Slowly turning the wheel.

In the second step, look for any noise coming from the bearings.

  1. The way your wheel moves from side to side.
  2. Slowly turning the wheel.

It’s time for the first test. Spin the wheel slowly. Perform this test by taking your board and gently spinning the wheel on it with your hand. It should be able to spin freely without having to use too much force. As soon as you try to spin it, it stops. These are all signs that your bearings are worn out and need to be replaced.

  1. Bearings make a lot of noise.

It’s time for the second test. The bearings should be checked for noise. There is more force you need to use to spin the wheel longer. Whenever it does, pay attention when it moves for noise. The bearings in good quality are very quiet. There is a very good chance that your bearings need to be changed out if they make any noises or make strange sounds.

  1. Moving from side to side.

To do this test, you need to move your longboard wheel to the side and back again. Make sure that the axle nut on your longboard is tight before you do this test. Now, move it along with the axle, going from the axle nut to the hanger and back again. Try to do these moves as quickly as you can. There will be no noise if your bearings are solid. They will keep your car from moving from side to side and will not move at all. You should double-check to make sure the axle nut isn’t loose. If you can still move the wheel, you should get a new one.

How To do it ?

  1. Take your axle nuts and speed washers off

Make sure your board is on its back. You can remove the axle nuts and speed washers with a skate tool or a power drill. Put them to one side. If you don’t want them to get lost, put them where you can see them! Do not take your wheels and other parts off.

  1. Remove the inner bearings

Pull the wheels off so that the outer bearings clear the end of the axle. Then twist the wheels off, leaving the inner bearings and spacers on the axle, and remove the wheels. When you open a bottle of beer, you move in the same way.

  1. Turn the wheels around.

In the end, you’ll be left with a pair of wheels with the outer bearings still inside of them. Turn them around and put them back on the axles so that the wheels are facing inwards, then put them back on.

  1. Remove the outer bearings

When you open a bottle of beer in the same way you did in step 2, remove the outer bearings.

 

  1. Check everything is aligned

This means you should now have a speed washer on each side of the axle. You should now have a spacer, a bearing, and a spacer on each side. If some things have come off, put them back on so that everything looks like this picture.

  1. Put the outer bearings on the ground.

With your new wheels, with the graphic facing inwards, push the wheels onto the bearings at the end of the wheel’s wheel tube. The process might be a little slow, but because you’re pushing both wheels on at once, it’s going to be twice as fast as it would be on its own!

  1. Turn your wheels round

Outer Bearings are the only bearings in each wheel. You should now have two pairs of wheels with one in each wheel. Turn the wheels so that they’re facing outwards again, and line them up with the inner bearings and spacers on the inside of the wheel.

  1. Make sure the inner bearings are in place.

Squeeze the wheels into the bearings on the inside. If it’s a tight fit on the core, you’ll have to get your muscles out. By doing both wheels at once, you’re going to make this twice as quick. The axles also keep everything in line, so there’s no need to mess around with a bearing spacer in your wheels.

9. Tighten up the axle nuts so they don’t move again.

Speed washer: Put it back on the axle. Then, thread the nut on and tighten it with your skate tool or power drill. To make sure that you have tightened your wheels enough but that they still move, give them a quick spin and shake. Then, go skate!